Must Have Heating and Cooling Advice

Although the cold weather is already here, it’s not too late for you to make sure your home is ready for the winter. You shouldn’t have to worry about the cold once you set foot inside of your home. Check out the following suggestions for improving your home’s heating and cooling.

Evaluate Your Thermostat

Check your thermostat turn it up a few digits to ensure that it comes on properly. If you’ve got a programmable one, make sure that it has the right settings stored. If there are problems with your thermostat not functioning properly, you should contact your localheating and cooling service for assistance. Don’t put off getting it repaired or replaced. A thermostat that malfunctions during the winter will be harder to control during the warmer months when you’re trying to cool down.

Purchase Extra Furnace Filters for Use

Invest in extra furnace filters. During the colder months, you should replace them a little more frequently than you normally would. On average, replacing your furnace filter every two months or more if you happen to have the heat on all the time is ideal. It is important for you to get in the habit of replacing your furnace filter often to improve airflow, efficiency and to prevent a bunch of dust and air pollutant from circulating throughout your home.

Remove Screen Doors and Windows

If you haven’t touched your windows and doors except to open and shut them since the fall, now is a good time for you to remove the screens out of them. If possible, you should install storm doors and screens to prevent drafts. You can always replace your screens in the spring or summer when it is more practical for them to be in use.

Take Care of the Chimney

If you’ve got a chimney in your home, now is as good of a time than ever for you to get it professionally cleaned. A dirty and clogged chimney is a huge fire risk that can literally send your home up in smoke. There should be no more than a 1/8-inch buildup of creosote or soot. If you see more, hire a professional chimney sweep right away.

You should also inspect the flue damper. They should be fully functional with no sticking parts. If it doesn’t close and seal properly, you should not use your fireplace and chimney until after it has been professionally serviced.

Inspect and Lubricate Your Furnace Blower

Check the blower on your furnace. You may need to follow the instructions in the manufacturer’s book. If the blower is not kept lubricated, it won’t be able to redistribute heated air throughout your home. This could lead to many problems and major repair issues. You should oil your furnace blower at least once a year and have it professionallyinspected several times a year to ensure proper operations.

Check Heating and Cooling Vents for Blockages

Throughout the year, you may move your furniture around your home to change its look. You may have also accidentally covered some of your home’s heating and cooling vents in the process. Blocked heating and cooling vents can make it hard for you to get your home to a comfortable temperature and keep it there. It can also put a strain on your heating and cooling appliance, making it harder for them to function normally.

In addition to making the above suggestions, you should hire your local heating and cooling company to come out and inspect your home’s ductwork. Ducts that are not properly sealed can create a myriad of issues that can drive your energy costs up and make it hard for you and your family to live comfortable inside of your home during any season.

No matter what your heating, cooling, and ventilation issues are, the experts at A&MMechanical Services are who you should call. Dial 615-649-8579 at your earliest convenience to discuss your needs.

Heat Pump: Springtime Maintenance

It’s time for spring maintenance. You may not be quite ready for all of the responsibilities it brings about for your home, but that doesn’t mean you should ignore them. Along with making sure your heat pump and air conditioning units are functioning properly, you may need to clean them up a little too. To make the task of springtime maintenance easier to do, check out the following suggestions below.

Importance of Maintenance

A heat pump is a vital component of your HVAC system that helps to maintain your home’s comfort. It is more efficient than other types of heating apparatuses that people use in their homes because it uses renewable energy from the environment. It also emits fewer toxic gasses, thus making them a safer and more affordable alternative to traditional furnaces.

Visual Inspection

Take a look at all of your heating and cooling appliances. Inspect them for signs of old age and damage. Most people do not clean their heating and cooling devices. It is not uncommon for them to covered in dust, dirt and spider webs. A dirty heat pump and heating and cooling appliance is a less efficient one. Dust it often and keep it from becoming covered in grime so you’ll have fewer reasons to call the repair man in the future. During your inspection, you should also keep an eye out for broken parts and missing screws or pieces. Listen to the unit to make sure it doesn’t hiss or give off weird noises that may indicate a problem is brewing.

It’s a good idea for you to get in the habit of performing visual inspections of your heating and cooling units periodically throughout the year to ensure that you don’t miss important signs of trouble. Catching potential issues while they are in the beginning stages can help to preserve your heat pump and air conditioning units’ functions and lives.

Check Refrigerant Levels

Even though you properly haven’t touched your air conditioning unit since last summer, now is a great time for you to check it out. You don’t want to wait until the summer to check out this unit because if it needs repair work done, you’ll end up waiting without the use of your air conditioning unit for a short while. If you take care of it now, any issues that are present can be fixed so that your air conditioning system is up and running in time at the first sign of hot and stifling temperatures.

If your air conditioning refrigerant levels are low, you should contact A & M Mechanical to schedule a service appointment. You should also inspect the ground around and under the unit to see if you can determine where the missing refrigerant went. Low refrigerant levels may indicate that there is a leak in the unit that needs to be repaired. The temptation may be there for you to skip this step and simply top off your AC’s refrigerant levels, but this will only lead to a much bigger repair issue sooner than you’d like. Repair issues often develop when you need your air conditioning system the most.

Getting your springtime maintenance HVAC tasks out of the way now can allow you to mark it off your checklist and focus on other responsibilities. You won’t have to take chances with your heating and cooling system’s health because it’s already been serviced for the season.

Don’t wait until there is a problem with your heating and cooling system before you contact the professionals at A&MMechanical Services. Dial 615-649-8579 whenever you have heat pump, heating and cooling, ventilation and air conditioner-related questions and concerns.

A&M Mechanical Commercial HVAC Maintenance

Comfort and indoor air quality are two major concerns for any organization. When either one is lacking, the consequences can prove to be expensive and time-consuming to deal with. Your workers’ health is at stake. When there are issues inside of your facility that can negatively impact their health, then employee morale can suffer, you’ll have a higher rate of call-offs, no shows, productivity issues, and even workers’ compensation cases. A&M Mechanical recommends for you to take the following recommendations into consideration.

Don’t Wait Until There Is a Problem

The HVAC needs more than a compulsory glance. It is often the one system that goes neglected until something doesn’t work. When your workers start complaining that it’s too hot or cold in the building and they resort to wearing sweaters, hats, and scarfs to stay comfortable, that’s when you decide to do something about. At this point, you could be looking at big repair bills or an intensive repair job. Either way, you’ve got it taken care of right away.

Many businesses resort to waiting until there is a problem with their heating, cooling and ventilation systems before they contact an HVAC contractor like A&M Mechanical. Little do they realize is that regular service and maintenance can keep things from escalating to this point. Understandably, keeping up with building problems and operations may be a challenge when you have so many other things to manage, but if you have a good facility manager and a service contract with A&M Mechanical, then these issues are virtually nonexistent.

Ignored Maintenance and Repairs Can Lead to More Issues

Believe it or not, each time there’s an issue with your commercial heating and cooling and ventilation systems, there are other building problems you should be concerned about. The heating, cooling and ventilation components in commercial buildings are not the same as residential ones. Although they may be capable of working longer in between service appointments, they tend to experience major repair issues that can prolong the length of time it takes to get them fully operational again.

The ductwork is something that is often neglected indefinitely for many business owners. Many people fail to realize just how big of a role they ventilation ducts play in their overall comfort. The ducts help to circulate cool and warm air throughout the building. That same air is breathed by everyone who works in the building and your customers. That same air can make people feel normal and well, or it can cause them to feel ill and uncomfortable. Dirty ductwork can collect mold, mildew, dust and other debris that can accumulate into the furnace and air conditioning systems, causing more health compromising issues to develop.

A&M Mechanical recommends for you and every other business owner in the area to be mindful of their employees’ comfort. Take measures to improve their comfort at work, and they’ll step up in their positions to do their jobs more efficiently. Invest in plants and air purifiers to help filter the air. The more pollutants and particles you can remove from the air, the easier it will be for your HVAC system to run. There will be fewer particles trapped by the furnace and air conditioning filters that could interfere with air flow.

Make your company’s HVAC system a top priority and have it professionally checked out at least twice a year. This can help to prevent major repair issues and employee health issues that are related to the heating, cooling and ventilation systems.

For assistance in restoring your company’s HVAC performance or for cleanings and installations, give the residential and commercial HVAC professionals at A&MMechanical Services a call at 615-649-8579.

Price HVAC Before it’s Time for Replacement

You shouldn’t have much to worry about if you’ve had your units serviced every year. Even though you are getting your HVAC system replaced, it is not necessarily because it is broken. You’re replacing it because you want to make your home more efficient and clean. Your old HVAC appliances are too outdated to be capable of giving you the level of efficiency and cleanliness you desire. There are plenty of new model units that can send your home’s efficiency through the roof and help you to maintain good indoor air quality.

Choosing a New HVAC Appliance

When it comes to choosing a new furnace, boiler or air conditioning unit, it helps if you have a set budget in mind. Don’t just choose some random price in your head and assume that you’re good to go, cause you’re not. Check out different units so you can have a good idea of how much money you should expect to spend. If you don’t come up with a reasonable budget, you may find that getting the right price HVAC is a lot more challenging than you think.

Having to choose your new HVAC equipment is better than moving into a home and not knowing what you have. You may be like other people who do not really do any investigative work into learning about their HVAC systems until something goes wrong. You don’t want to continue to be like that. Taking a blind eye to your heating and cooling system, especially when you are new to the property can lead to unexpected issues later on. The last thing you want to do is move into the property and not be able to turn the heat or air conditioning to get comfortable.

Choosing a Good HVAC Company

Start your search for a good HVAC company now. Don’t wait until you need them to start looking. When you have to hire professionals at the last minute, you may not be as diligent in your screening. You are more likely to overlook important pieces of information that may indicate that you should consider other candidates. You don’t want to mistakenly hire the wrong professional, or you could end up having a bad experience that makes it harder for the right professional to wow you with their service and experience.

A good HVAC professional can help you to get the best price HVAC. They can inform you of the requirements you need any units you are interested in to meet. They can provide you with professional recommendations on which products you should get. And they can instruct you on how to maintain them, so you don’t have to call them out as often and incur unnecessary repair and service bills.

Taking care of your home’s HVAC needs now can save you from having to stressing out. There are fewer chances of something going wrong. If something does go wrong, then you already know who you can call to straighten things out.

If you got HVAC-related questions or concerns, feel free to contact A&M Mechanical Services at 615-649-8579.